Metal Roof Innovations Central

What is a Trapezoidal Rib Roof Profile?

Posted by Kimberly Reichert on Apr 29, 2019 12:03:47 PM

A trapezoidal roof profile has a ribbed trapezoidal-shape pattern across the panel. This means, it is a quadrilateral (or a four-sided shape – see Figure 1) that has just a single pair of parallel sides. Sometimes, trapezoidal roofs are mistakenly referred to as corrugated. This is a misnomer as the corrugated profile has a repeating wavy pattern across its surface.Trapezoidal rib roofs are popular with producers because the shape makes them very material-efficient (a high strength-to weight ratio). This makes for a very cost-effective profile. The shadows of the trapezoidal shapes offer clean lines whether installed vertically, diagonally, or horizontally. They also possess good structural characteristics and can carry design loads well (e.g. for snow and wind uplift). However, it is not considered as premium a profile as standing seam due to its attachment method.

Read More

Tags: Brackets, standing seam metal roof, exposed fastener, rooftop mounting, round point setscrews, trapezoidal, cost-effective

S-5!® Featured Product at IRE 2019 - S-5-N Clamp

Posted by Kimberly Reichert on Apr 16, 2019 2:20:34 PM

 

In our booth at IRE Nashville this year, we showcased our usual innovative selection of clamps and brackets. But we also featured a new product: the new and improved S-5-N clamp is an innovative attachment solution that cures your nail strip profile seating issues.

The clamp features an insert to facilitate installation and fit. it also fits seam profiles having a base of rib dimension < .82". 

Read More

Tags: pv modules, snow retention, solar mounting, metal roofing, exposed fastener, PV technology, PV, maintain roof warranty, non-penetrating, round point setscrews, weather proofing, rooftop utilities, non-corrosive, stainless steel

What are the Parts of a Metal Roof?

Posted by Kimberly Reichert on Apr 4, 2019 11:18:59 AM

WORD OF THE WEEK: Dormer

PRONUNCIATION: \ ˈdȯr-mər

PART OF SPEECH: NOUN

SENTENCE: // A dormer is a structural projection from the main roof. It is usually gabled and typically has a window. The word dormer refers to the whole projection, not just the window. 

When referring specifically to the window itself, it would be called a “dormer window”. It comes from the Latin word dormitorium, which means “sleeping room”.

But what about everything else that makes up a metal roof? From flashing, ridges, to valleys and eaves. Where are all these on a roof and what is their purpose? Read on as we deconstruct the rest of the metal roof.

Read More

Tags: metal roofs, metal roofing, standing seam metal roof, exposed fastener, roof panels, corrugated, metal panel, trapezoidal, sandwich panel

Metal Roof vs Asphalt Shingles Comparison: 9 Tips for Choosing - 2019

Posted by Kimberly Reichert on Mar 18, 2019 11:59:16 AM

Pop quiz. Should you install a metal roof or asphalt shingles? Asphalt shingle roofs are everywhere. But metal roofs have been in use for almost three thousand years. They have come a long way from the simple, yet functional corrugated or standing seam metal roof design usually associated with barns or sheds. So, which is the best choice for you? To answer this, let’s take a deeper look under the hood, or the roof, as it may be.

Read More

Tags: standing seam metal roof, exposed fastener, rail mounted, solar PV, solar technology, rooftop equipment, non-penetrating, manufacturing, maintenance, green, asphalt shingles, recycling, durability, environment

What is a Corrugated Metal Roofing Panel?

Posted by Kimberly Reichert on Feb 28, 2019 11:21:47 AM

A corrugated panel has a repeating wavy or rippled pattern across its design. It was the first mass-produced metal panel design in the United States. These panels can be used for roofing, siding, decking, and flooring. Corrugated panels are connected by overlapping the sheets, and then securing them in place with exposed fasteners. 

Read More

Tags: Solar, Roof Clamps, pv modules, metal roof clamps, Brackets, metal roofing, exposed fastener, solar PV, rooftop mounting, rooftop equipment, rooftop utilities, load tested, non-corrosive, stainless steel, corrugated, EPDM, UV Exposure, butyl sealant

Top 5 Reasons for Installing Snow Guards on Your Metal Roof in 2019

Posted by Kimberly Reichert on Feb 25, 2019 2:17:15 PM

Have you been carefully (or not so carefully) monitoring that gravity-defying overhang of migrating snow that sits atop your roof? Glistening beautifully in the sun, it has stayed up there for days; it will surely stay up a bit longer, right? Sorry, no guarantee. Avalanches are unpredictable and catastrophic events. The snow will fall wherever and whenever it wants to – on you, a loved one, your car or sidewalk.

Read More

Tags: Snow Guards, Snow stops, sliding snow, snow retention, metal roof clamps, metal roof snow stops, metal roof clips, snow rails, snow stopper, snow clips, snow fence, snow bar, exposed fastener, roof panels, rooftop avalanche, rooftop mounting, maintain warranties, maintain roof warranty, non-penetrating, clamps, installing snow guards

Visit S-5! at IRE

Posted by Kimberly Reichert on Feb 11, 2019 11:57:08 AM

It’s time! IRE – the International Roofing Expo has started in Nashville, TN. It officially runs February 11-13 in Music City Center. The exhibit hall in the Center is located in downtown Nashville – incredible roofing products and within walking distance to restaurants and local music venues. What could be better?

Read More

Tags: Solar, Roof Clamps, pv modules, Snow Guards, sliding snow, metal roofs, snow retention, S5 clamps, metal roof clamps, solar mounting, Brackets, metal roofing, standing seam metal roof, snow stopper, snow bar, exposed fastener, roof panels, PV technology, direct mount, PV array, photovoltaic, rail mounted, rail less, solar PV, solar technology, rooftop mounting, rooftop equipment, maintain roof warranty, rooftop utilities, load tested, holding strength, aluminum, stainless steel

What is a Rooftop Avalanche? [video]

Posted by Kimberly Reichert on Jan 30, 2019 11:17:24 AM

It is a sudden release of snow off a rooftop. Falling snow forms a temperature-sensitive bond to the surface of a metal roof. As that roof is warmed, (through sun or building heat loss), the bond with the snow is broken and a thin film of melt water lubricates the roof. This sudden release from a rooftop can dump many tons of snow below the eaves in a matter of seconds, endangering building elements, landscape, vehicles and pedestrians.

Qualifying Snow Retention Systems for Metal Roofing, from the Metal Construction Association discusses the rooftop avalanche in the following terms:

Metal roofs provide durable, long-term solutions and have been preferred by many for use in challenging northern and alpine climates where snow and its migration on and from the rooftop is a normal occurrence. Such climates can pose unique challenges for any roof. Pitched roofs of a material that has a slippery surface can pose sliding snow and ice hazards below eaves. In many instances, snow retention systems are installed on these roof types in order to reduce the risk of sudden rooftop avalanche and mitigate the hazards present in the discharge areas below the eaves.

Read More

Tags: Roof Clamps, Snow Guards, Snow stops, sliding snow, plastic snow guards, metal roofs, snow retention, S5 clamps, metal roof clamps, FAQ, Brackets, metal roof snow stops, metal roofing, metal roof clips, standing seam metal roof, snow rails, snow stopper, snow clips, snow fence, snow bar, exposed fastener, thermal movement, roof panels, rooftop avalanche

How Do Solar Photovoltaic (PV) Panels Work?

Posted by Kimberly Reichert on Jan 23, 2019 10:22:15 AM

Photovoltaics (PV) is the process of converting light into electricity. PV technology converts sunlight (otherwise known as solar radiation) into direct current electricity. This process uses semiconductors, (the most common semiconductor material being crystalline silicon), so when the sun hits the PV, the electrons are released and form an electric current.  Photovoltaic technology is commonly attached to a panel; and these solar panels are connected to one another and mounted onto a frame. This PV assembly is called a module and you can wire these modules together into an array. Rays of sunlight (photons) are absorbed by the solar panels. This power then gets converted into Alternating Current (AC) to be used in the house - or sold back to the centralized city grid.

Read More

Tags: Solar, pv modules, metal roofs, metal roof clamps, solar mounting, Brackets, solar attachment, exposed fastener, PV technology, PV, direct mount, PV array, photovoltaic, rail mounted, solar PV, solar technology

Standing Seam vs Exposed Fastened Metal Roofs: 2019 Comparison

Posted by Kimberly Reichert on Dec 19, 2018 12:28:39 PM

A metal roof is a metal roof, right? WRONG. Standing seam and exposed fastener roofs may both be metal and may even serve similar purposes, but the two styles are very different indeed.

Read More

Tags: Roof Clamps, metal roofs, snow retention, metal roof clamps, metal roofing, standing seam metal roof, exposed fastener, thermal movement, exposed fastened

   

Subscribe to Email Updates

S-5!: Industry-Best Warranty

 

Why do industry experts endorse S-5!? Because they know our rigorously researched, tested and quality engineered products deliver unprecedented value and innovative excellence. And all of our USA-made clamps and brackets are backed by an industry-leading 25-year manufacturer warranty.

Posts by Topic

see all